Dual hydraulic cylinders drive, stable lifting and lowering. Adopt two steel cables for equalization, force two carriages to move synchronously.
About TLT235 / 240 SBA Floor Plate Two Post Lift
Dual hydraulic cylinders drive, stable lifting and lowering. Adopt two steel cables for equalization, force two carriages to move synchronously
Capacity : 3.5T / 4.0 Ton
Lifting height : 1.95M
Lifting time : 50Sec
Lowering time : 40Sec
Power Supply : AC380 3PH AC220V 1PH
Motor Power : 2.2KW
Drive through width : 3.37M
Overall Height : 2.86M
Bottom Clearance :1.1M
Package : 2900*550*740mm
- Fully automatic unlocking safety device is adopted for operating only with UP/DOWN button.
- The cable and oil pipe are fully concealed; with decent and elegant appearance.
- Double hydraulic cylinder and high strength chain drive makes stable and smooth lifting and lowering.
- Wire rope equalization system forces synchronous movement of two carriages and effectively prevents vehicle form tilting.
- 24V low voltage control box（IP54 level）ensures operator’s safety.
- Cylinder travel limit switch effectively protects cylinder and extends its lifespan.
- Emergency lowering valve can be manually operated to make lift lower safely in case power is off.
- Flow-control valve is deployed to make lift slower or stop lowering for the case of oil pipe explosion ,thus protects operator’s safety and vehicle not being damaged.
- CE-STOP function with safety alarm beep would automatically warn operators to keep safe distance from lift when it lowers to about 250mm high from ground.
- Door rubber pad protects car door from being damaged in collision.
- More lifting pads with different height meets the requirements for light lorries and SUVs.
- Asymmetric arms are optional.
- Passed 115% dynamic loading test and 150% static loading test.
- CE certificated.
- Rated Load ：3500kg / 4000kg
- Lifting Height ：1850mm
- Initial Height ：110mm
- Lifting Time ：≤50s
- Lowering Time ：≥20s≤40s
- Passing Width ：2486mm
- Overall Width ： 3370mm
- Overall Height ：2860mm
- Motor Power ：2.2kW
- Motor Voltage ：3 phase/380v or Single phase/220V
- Working Noise ：≤75dB（A）
- Working Oil Pressure ： 16M Pa