A GLOBAL PLAYER IN THE
AUTOMATIVE AFTERMARKET



HOME	CONTACT US	SITEMAP

Diagnostic Product

Lift Product

Maintenance Product

Inspection Product

Tire Changer Product

Tools Product

Other Product




		Manuals
		Service Centre

		More

Home > Inspection Products

Inspection Products

KWB-408 Wheel Balancer

INTRODUCTION

KWB-408 wheel balancer features compact size, good design, simple operation, strong functions and high measurement precision. It can be a great help in car repair garage and tire shops.

FEATURE

Automatic measuring scale (manual input of values)
Static and four modes dynamic balance inspection both with compensation
Indication of imbalance both in grams and ounces
Locking wing nut reduce time of mounting and demounting wheel
Precision of imbalance up to 1 gram
Automatic correction and memorization of structural parameters
Optional universal clamping fixture for different type of wheels
High precision indication

SPECIFICATION

Rim Diameter:14″~24″(254--558mm)
Rim Width:1.5″~18″(38--457mm)
Balancing precision:±1g
Cycle time:7s
Power supply:220V/110V 50Hz/60Hz
Motor Power:180W/370W
RPM:240rpm
Working noise:<70dB(A)
Max. Wheel Weigh: 65kg
Dimensions: 804*1348*1326mm

»Top

KES-200 Portable Engine Analyzer

INTRODUCTION

KES-200 is a handheld engine analyzer specially designed for engine test and analysis with the following functions: 4channel oscilloscope, multi-meter, ignition waveform test, starting system analysis, charging system analysis, cylinder analysis, PC link and print, etc.

FEATURE

4 channels real time auto oscilloscope
Integrated with smart multi-meter
Available for all systems of DLS and CIS gasoline engine, up to 8 cylinders
Sensor simulation, solenoid driving
Large LCD display, menu guided operation
Software upgradeable, built-in database
CE certified

SPECIFICATION

Oscilloscope
Item	Specification
Number of Channels	4
Voltage DIV	0.1V~20V DIV
Time	25ms~20s
Frequency Width	500kHz
Measuring Voltage	DC±150V
Magnification Times for Waveform	Max. 5 times
Dynamic Waveform Memory	50 pages on-line memory; 8 pages off-line memory

Multi-meter
Item	Specification
Voltage	DC –120~+120V
Current	-0.4~0.4A
Resistance	0.0~40.0MΩ
Frequency	1Hz~100kHz
Duty cycle	0~100%
Battery voltage	9~15V
Tachometer	300~8000rpm
Intake manifold vacuum	0~105KPa

»Top

STS-600 Sensor Simulator & Tester

INTRODUCTION

STS600 sensor simulator & tester is a smart testing device with power-on self-test (POST) and range-switching functions. It is mainly used to conduct voltage test, resistance test and frequency test for sensors, and to simulate the output signal (voltage, frequency and O2 sensor signal). The users can enjoy great convenience provided by its user-friendly interface and fault tolerance design.

»Top

KTI520/510 Digital Inflator

FEATURE

Computer measurement, accurate reading and inflates time short.
LED shows, clear test results, suitable for inside or outside and night.
Measure air pressure and inflate at the same time; Swift and convenient Operation.
Pre-establish the value of inflation and deflation. After the air gun is inserted in the tire (the non- empty tire), the inflator will test automatically and can judge whether inflation or deflation. When the air pressure in tyre reaches the pre-established value, the inflator sound a buzzer to remind operator and stop work automatically. Press " RUN/STOP " key to inflate and stop at the putting value automatically when there is no air in the tyre,
Can pause when inflation or deflation
With air pressure unit conversion function, can show the unit value of Bar or Psi.
The product with elegant appearance, install it conveniently.

SPECIFICATION

Working range 0~8Bar (0~116Psi)
Precision :0.1Bar(1Psi)
Outer source of the gas：6~9Bar(87~130Psi)
Flow>0.2M³/min
Inflating Speed :0.1 M³/min
AC Power :220V±10% 50Hz/110V±10% 60Hz
Temperature Range :-10°C—+50°C
Humidity :<95%
Consumption :20W

»Top

« Back