|
|
| Diagnostic Products |
| |
| Crecorder |
 |
| INTRODUCTION |
| Crecorder is a remote diagnostic tool developed with car owners in mind. It can collect engine data when the car is driven on the road. After the recorded data are fed into de client terminal helped by the networking of the Crecorder website and client terminal, remote diagnosis has been turned into reality. |
| FEATURE |
- Plug-and-play tool with compact design
- Automatic recording of data without human interference
- User-friendly interfaces and clear display of data
- Remote diagnosis through connection with Crecorder website
|
| SPECIFICATION |
- Supported Protocols:
- OBDII:ISO9141, SAEJ1850VPW, SAEJ1850PWM
- EOBD:ISO14230 KPW
- CANBUS:ISO15765
|
|
|
| |
| »Top |
| Creader IV FOR OBDII & EOBD |
 |
| INTRODUCTION |
| Creader lV is the newest portable auto read and clear code tool launched by Launch. Because it's very small, so it carries easily for drivers. In thus, it can tell the driver the fault of electrical system at any time. After connecting the Creader to the auto socket, the driver can read and clear trouble code through operation with buttons on the unit. Creader can read trouble code and clear trouble code. In addition, it supports OBD & EOBD protocol and otherwise systems. |
| FEATURE |
- LCD display
- Display the content of trouble code
- FREEZE FRAME function
- Supporting CANBUS diagnosis
- Manual reading code and clearing code
|
| SPECIFICATION |
- LCD display (128*32), displaying by 2 lines, LED backlight
- Two keys operation
- Enclosed a disc, including most manufacturer code information. Now there are more than 7000 manufacturer codes, and it updates continuously.
- Enclosed users' manual, including the explanation of trouble code before 1000 number.
|
|
|
| |
| »Top |
| X-431 SENSORBOX |
 |
| INTRODUCTION |
| X431-SensorBox is the accessory part working with X-431 main unit for sensor testing and simulating. Its major functions involve the simulation and test for all sensors on vehicles. Under simulation conditions, it can receive the control signal from X-431 main unit and carry out all the commands. Under test conditions, it can transfer the data back to the main unit in accordance with the control signal given by the main unit. Under test condition, the latest data can be recorded in the form of curve. This puts the change of the test data right in front of your eyes and is highly significant for process analysis. Powered by vehicle battery, SensorBox is widely adaptable to voltage change within the range of 8-28 volts. With the design of separated power circuits, measurement under all conditions can be made without removing the sensors from the vehicle. |
| FEATURE |
- Connected with X-431 Main Unit to simulate and test various types of sensors in vehicle.
- Graphic Display
- Voltage Sensing
- Searching Index: Various standard sensor parameters are available and can be searched by index in different ways.
- Test flexibility: It can be recharged by vehicle battery and is suitable for a wide range of voltage from 8-28 Volts. Also it can function without separating the sensor from vehicle.
- Safety Protection: Professional design to offer safety protection to itself
|
| SPECIFICATION |
- Signal Simulation
- Range of voltage output: -12 to +12 Volts
- Maximum output current: 40mA
- Precision of output voltage: +/-1%
- Pulse signal
- Range of simulated frequency: 0.1 to 15 kHz
- Range of output pulse: -12 to +12 Volts
- Output duty ratio: 10% to 90%
- Voltage Test
- Measurement range: DC-4000 to +4000 Volts
- Input impedance: 10M
- Resistance Test
- Measurement range: 0 to 4 MΩ
- Voltage: 1.2V
- Frequency Test
- Measurement range: 0 to 15 kHz
- Input impedance: 300 KΩ
- Input range: 1 to 12 Volts
|
|
|
| |
| »Top |
| X-431 Heavy-Duty |
 |
| INTRODUCTION |
| Including all the advantages of its predecessor, X-431 Heavy Duty is designed to cover heavy duty diesel and gas-fueled vehicle models of 12V & 24V voltage. It features ergonomic design, compact structure, convenient use and strong expandability. |
| FEATURE |
- Compact and ergonomic design
- Professional & durable tool
- Covering heavy duty diesel and gas-fueled vehicle models of 12V & 24V voltage
- No need for battery conversion when testing 24V trucks
- Fast upgrading via the Internet to keep up with the latest vehicle models
- International design to adapt to all diagnostic sockets
- Including all the electronic control systems
- Unique data transfer to ensure fast operation
- Strong waveform display function
- Integrated connector to offer great performance
- Connected with PC to keep service records through optional X431 PCCENTER
- Multi-language choice
- Handwriting input on large touch screen
- Large compact flash memory for data storage
|
|
|
|
| |
| »Top |
| |
|
