| TBM-111-121-131 Short Wave Infrared Vehicle Paint Light Dryer |
 |
| INTRODUCTION |
The equipment adopts the frosted quartz glass, which is extremely transparent to infrared, to obtain the results of deep penetration, good finish, no peeling, and increased adhesive. It compares favorably with the best of such equipment in the world
|
| FEATURE |
- The special frosted quartz emitter of shortwave infrared is highly heat-penetrative.
- The emitter can be moved upwards or downwards in relation to the pillar. The entire heater assembly can be swiveled through 300 degrees.
- It can be used to cure lacquer putty and various coats, enamel and so on.
- The drying/curing time is fast for all types of finishes, so the throughput is increased.
- TBM series spot curing unit is easily portable and very suitable to medium and small sized vehicle service station.
- TBM series spot curing unit is the best equipment for curing areas such as the rear, top, left and right side of auto body.
|
|
|
| |
| Model |
No. of
heater
tubes |
Length
of
heater
tubes
(cm) |
Power output (w) |
Distance
from
panel
(cm) |
Time
(min) |
Coverage
area
(L×W)
(cm×cm) |
High
temperature |
Moderate
temperature |
| TBM-111 |
1 |
58 |
800 |
800 |
40 |
15~30 |
85×65 |
| TBM-121 |
2 |
58 |
1600 |
800 |
45 |
15~30 |
100×65 |
| TBM-131 |
3 |
53 |
2400 |
800~1600 |
45 |
15~30 |
140×60 |
|
| |
| »Top |
| TCR-101 Collision Repair System |
 |
| FEATURE |
- Highly precise decks ensure the accurate measure for the complete image of the damaged area
- Dual towers to produce 360o pulling
- Equipped with imported hydraulic parts and rods to facilitate pulling to all directions
- Fitted with ENERPAC pneumatic pump and hydraulic pump
- Highly adaptable PTP body measuring system
- Deck made of 16Mn steel treated with shot blast machine
- Equipped with adjustable clamps for all kinds of vehicles
- Long slot deck to give better convenience for operation
- Clamping with gauge to give more accurate measurement
- 14 piece tool kit
- Chains to offer pulling at 80 intensity levels
- Body reference data keeping up with the latest in the world
|
| SPECIFICATION |
- Length: 5328mm
- Width: 2100mm
- Height: 300mm
- Tower size: 2000mm diameter: 133mm
- Net weight: 2300kg
- Gross weight: 2500 kg
- Air pressure: 0.7Mpa
- Maximal hydraulic pressure: 70Mpa
- Tower pulling capacity: 98000N
- Radius of pulling: 360°
- Measurement accuracy: 2mm
|
|
|
| »Top |
| SL-501 Vehicle Washing Machine |
 |
| FEATURE |
- Horizontal Brush: one (foam or soft brush optional)
- Vertical Brush: two (foam or soft brush optional)
- Small vertical brush: two (foam or soft brush optional)
- Dryer: Horizontal dryer: One set; Vertical dryer: two sets
- Program control (error display inclusive) :One (Mitsubishi)
- Electric Control: Schneider
- Photoelectric tracking: Banner
- Foaming & Waxing: One set each
- Rack: thermo galvanized on inside and spray coating on the outside
- Drying system
|
| SPECIFICATION |
- Rail Length: 10000mm
- Length: 2900mm
- Width: 3700mm
- Height: 3150mm
- Width for Washing: 2000mm
- Height for Washing: 2000mm
- Color: Red
- Consumption:
- Power:16.5 Kw/h
- Water: 120L/vehicle
|
|
|
| »Top |
| CCH Paint Booth |
 |
| |
| SPECIFICATION |
| ITEM |
Standard mode |
Mode |
Luxury mode |
| CCH-101 |
CCH-102 |
CCH-201 |
CCH-301 |
CCH-401 |
| Overall dimension (m) |
7.0*5.3*3.5 |
8.3*5.5*3.5 |
7.0*5.3*3.5 |
7.0*5.3*3.5 |
7.0*5.3*3.5
|
| inner dimension (m) |
6.9*3.9*2.7 |
8.2*4.0*3.1 |
6.9*3.9*2.7 |
6.9*3.9*2.7 |
6.9*3.9*2.7 |
Width of door for
entrance of vehicle (m) |
3.0 |
3.0 |
3.0 |
3.0 |
3.0 |
| Height of door for entrance of vehicle (m) |
2.7 |
3.1 |
2.7 |
2.7 |
2.7 |
| steel plate thickness(mm) |
0.326 |
0.326 |
0.326 |
0.426 |
0.426 |
| filtrated area(m2) |
20 |
25 |
20 |
20 |
20 |
| Air flow volume (m3/h) |
21000 |
36000 |
22000 |
25000 |
25000 |
| Air velocity withinbooth (m/s) |
0.25~0.35 |
0.25~0.35 |
0.25~0.35 |
0.3~0.5 |
0.3~0.5 |
| Ventilation times(times/hr) |
265 |
352 |
265 |
332 |
332 |
| Working temperature(°C) |
60~80 |
60~80 |
60~80 |
60~80 |
60~80 |
| Oil consumption (kg/set) |
6~8 |
9~10 |
6~8 |
6~8 |
6~8 |
| insulation Material of wall panel |
PE |
PE |
PE |
PE |
Rock rool |
| Power(kw) |
9 |
12.5 |
13.5 |
17 |
25 |
| Main blower |
One unit
7.5 KW European style professional blowers |
One unit 11KW European style professional blowers |
One unit 7.5KW European style professional blowers; and one unit 5.5KW standard blower |
One unit 7.5KW European style professional blowers, and one unit 7.5KW standard blower |
One unit 11KW European style professional blowers, and one unit 11KW standard blower |
| environmental protection device |
no |
no |
no |
no |
yes |
| Nether lighting |
no |
no |
Equipped with 8 sets |
Equipped with 8 sets |
Equipped with 8 sets |
|
|
| |
 |
|
| »Top |
| |
